I am building a TV stand which allows the TV to be rotated for better viewing. I found a lazy susan assembly from Rockler, but am not certain how to install it. I can swivel the base to access the mounting holes for one surface, but don't know how attach it to the other surface. My only idea is to use low-profile carriage bolts with the nuts inset inside the cabinet top. Has anyone installed one of these? DKC
chris on some susans there is an access hole on one side .
you'll have to line up the hole that you have to drill(in your shelf) with this one so you can get your screws in.also i have made my own cause the tv's were just to big and heavy.just put two pieces of 3/4 plywood(with formica on one side) togeather."formica togeather" and neatly bolt them togeather in the center!!mount some heavy slides on it and and you have a pullout swivel!! good luck!!