Results 1 to 3 of 3
  1. #1
    Janis (Guest)
    Guest

    hanging stemware rack

    Do you have any patterns or plans
    to build a wooden hanging stemware
    rack? Your time and efforts are
    sincerely appreciated.
    thank you.

  2. #2
    Member
    Join Date
    Dec 1969
    Location
    New Smyrna Beach, Florida.
    Posts
    2,681

    RE: hanging stemware rack

    My father used to make them for Bloomingdales in NY.

    Basically he took a panel raising bit and cut that profile on both edges of two pieces. Then he ripped one of the pieces in half. This gave him to two outer edges and the unripped piece was the center. This gives you two rows of glass storage.

    He bevelled some stock on both sides and use them to cross the glass holders. These were spaced about 3" apart and held the bottles.

    The whole thing was attached to a piece of 1x4 that was in turn attached to the wall.

    I've got one at home that I could sketch up if you need detailed plans.

    M


  3. #3
    Member
    Join Date
    Dec 1969
    Location
    New Smyrna Beach, Florida.
    Posts
    2,681

    hanging stemware rack sketch

    Here's a quickie sketch. I'll leave the details for you to fill in:


    M


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •