The majority of my projects pictures.

[alleyyooper]

I buy 1x12x8' and rip them on my table saw to 1x9 5/8 x 8. I then cut them in to sizes 16 1/4 and 19 7/8 with my miter saw
I use what I call a Dado sled to cut out box joints on my table saw. then in the 16 1/4 pieces I cut a rabbit with the dado blade for frame rest.
Next I put a molding head cutter on the table saw and add a home made jig to cut handles in the outside middle of each piece.
When that is done I dry fit the parts and assemble them.




The flat pieces with the oblong hole is a cover.

A hint as to what I built.




Al
Garden View Apiaries, where the view is as sweet as the honey.

[quartlow]

Simple and functional, I liek it. But I knew where you where going when I saw the second pic.

I had honey bees move into the front of the trailer last year, wouldn't have been so bad but they ate through the insulation and then the drywall and started buzzing around the house. Was a little annoying. Local beekeeper came and got them out and I got me some good sweet honey!!