Results 1 to 2 of 2
  1. #1
    Member
    Join Date
    Mar 2012
    Location
    Minneapolis, MN
    Posts
    4

    Need help finding the Rail and Stile router bit I want...

    So I want to build some cabinets for a bathroom remodel. We found the cabinet door style that we like at The HD but i cant find a router bit that i think will give us the door detail that we want. We want the chamfered look on the front of the cabinet frame that you can see from the profile shown in the picture.

    If anyone has any help as to where i can find a router bit of this profile or another method to achieve this look.

    thanks
    IMG_20120404_172339.jpg

  2. #2
    Member
    Join Date
    Mar 2002
    Location
    Napa Valley, California, USA.
    Posts
    644
    The profile in your pic was produced, I believe, on a shaper---it has "eased edges" which are common on shaper cutters, but something I have not seen on cope-and-stick router bits. But you can buy router bits with a similar profile here:
    http://www.infinitytools.com/Rail-St...products/1039/

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •