Results 1 to 2 of 2
  1. #1

    Help with table saw pulley / belt installation

    All, I would appreciate any feedback/suggestions you may have to offer. I have a General International cabinet table saw and I just replaced the pulley that is used to connect to the motor and the saw blade shaft. I have a new belt that must be stretched between the motor pulley and the saw pulley and I don't have a clue what I can use to stretch the belt enough to put the belt in place...any suggestions?

    Thanks!

    Kevin B.

  2. #2
    Member
    Join Date
    Dec 1969
    Location
    Port Coquitlam, British Columbia, Canada.
    Posts
    1,808
    Is there not a way to swing the motor closer to the saw pulley to install the belt, not sure which saw you have but top lug on motor mount is slotted on some.
    Frank C

    Sawdust Making 101
    http://sawdustmaking.com

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •