I am interested in obtaining a smooth bottomed forstner bit,
1 1/16" with at least a 7" shaft. Can anyone direct me to the proper source?
Go to www.mlcswoodworking.com they have the size bit you need item 9214. Also they sell bit extenders ( item 9270 )
Hope this helps
Thanks a bunch Dave. Great site which I will certainly bookmark
for future reference.
Once again, I appreciate your help
I'm in need of a 1 15/32" (1.46875) or 37mm Forstner bit.
Shaft length and diameter are not critical.
Can anybody out there steer me in the right direction?
If you don't mind spending $100.00 you can go here:
Thin it! Use about 5% paint thinner, or mineral spirits...
I have just been given a Coronet Major wood lathe , but the aluminium face plate is broken , where in the UK or Portugal can I get a replacement . It is quite an old lathe but it still works well ,...
Poplar is okay if they are to be painted. If not, or stained, I would not choose poplar. It is soft, uninteresting and does not finish well (unless painted). Oak or maple are not that much more...
Note: the first two pictures, top to bottom, show the sample woods I bought to match: mahogany, walnut, oak, the bottom is the side of the table. The remaining 3 pictures are of the wood in question...
I purchased a very old dining set that i'm fixing and refinishing. I'm more of a handy person than a woodworker but am enjoying the process.
I'm still stripping all of the pieces, but I know I'll...