The web's woodworking supersite |
|
|
|
|
Saturday,
July 04, 2009
An Extra Vise for Your Shop
While working on a project requiring hand-cut dovetails, I came up with this simple vise idea. I took a scrap of hardwood 1" thick by 18" long by 8" wide and predrilled and countersunk holes 1" from the top edge. Then I cut a slot on both ends, 3" deep and wide enough to accommodate my Bessey bar clamps. I took a second piece the same size and cut the slots in the same place. Then I fastened the first piece to the workbench, slid in the clamps, and put the second piece on with the screw ends facing out. Now I have an extra wood vise whenever I need one.
Check back everyday. You'll find a new tip.. tested and proven advice
for common questions or projects.
Got a woodworking tip you'd like to share? E-mail it to us.
|
|
|
|