1/4"-Round Molding Miters
Q. Two readers wrote in with similar questions:
"Can you tell me the secret to cutting 1/4" round molding for inside and outside corners? I have the correct tools but not the experience."
"My husband and I are trying to install 3/4" quarter round on our bathroom ceiling [which it needs] and we can not get the miters right! Can you give us any tips or tell us where to find a book with directions and pictures?"
Rob Johnstone: "I know this sounds funny, but don't miter the inside corners & cope them. Use a coping saw to cut the exact shape of the quarter round molding where the two piece meet. Then butt the cut molding directly onto on untrimmed piece of molding at the corner of your ceiling. When done correctly, the resulting joint looks like a perfectly mated miter. This does take a bit of practise, but once you get the hang of it, you'll be proud of the work you are doing. Outside corners are different, there you just need to "sneak up" on the joint, using test pieces to make sure that the pieces evenly divide the corner's angle (which is seldom exactly 90°)."
This article originally appeared in the Woodworker's Journal eZine.
Click here for information on this free, twice monthly online publication.
Copyright; 2010 Woodworker's Journal
All rights reserved. No part of this article may be reproduced in any form or by any electronic or mechanical means, including information storage and retrieval devices or systems, without prior written permission from the publisher.