I like to use a table saw sled when my work requires an accurate, 90° cut. I devised the hold-down shown in the sketch below to keep my fingers well away from the blade and also prevent the work from "creeping" as it is being cut. - Joseph Raber, Louisville, Ohio
This article originally appeared in the Woodworker's Journal eZine.
Click here for information on this free, twice monthly online publication.
Copyright; 2010 Woodworker's Journal
All rights reserved. No part of this article may be reproduced in any form or by any electronic or mechanical means, including information storage and retrieval devices or systems, without prior written permission from the publisher.