Here is a nice band saw project I came up with a while ago and I have made many of them for friends and relatives.
You need a fairly thick piece of wood to start with (at least 2 inches) but using the bottom off cut for the second smaller set of tongs was a happy accident that became part of the plan in hindsight (in fact, the smaller set are the ones I use most often - perfect bacon flippers)
This article originally appeared in the Woodworker's Journal eZine.
Click here for information on this free, twice monthly online publication.
Copyright; 2010 Woodworker's Journal
All rights reserved. No part of this article may be reproduced in any form or by any electronic or mechanical means, including information storage and retrieval devices or systems, without prior written permission from the publisher.
|